How to Update Air-R

How to Update Air-R

Connect the reader to the internet Wi-Fi connection.

o   Log in to the controller through your local network:

§  Login: admin

§  Password: admin123

o   Check the reader’s date and time settings. Ensure that the current date and time are correct, as this is critical for the update process.

o   Go to the Maintenance section of the interface.

o   Click the Check & Update button.

o   Wait for the update process to complete.

After the update process is complete, verify its success by repeating the following steps:

o   Return to the Maintenance section.

o   Click the Check & Update button again.

o   If the update was successful, you will see the message: "No Update Available."

o   If the update not successful - Wait for the update process to complete.


    • Related Articles

    • How to Verify the Correct Network Configuration of Lumiring device (Icon-Pro, WW or Air-R/CR)

      o Connect the device to the internet using either Ethernet (Icon-Pro, Air-CR) or Wi-Fi (WW or Air-R) o Log in to the device through your local network: · Login: admin · Password: admin123 o Verify the date and time settings on the device. The current ...

    • How to use the AIR-Key

      Instructions on how to use the AIR-Key. 1. To use AIR-Key keys it is necessary to download the ViKey Wallet application. 2. It is necessary to have AIR-Key keys available to add to the applications installed in users' smartphones. After installing ...

    • WW hardware (HW) interoperability,Firmware (FW) upgrade. How to bring WW to the latest FW release.

      IMPORTANT: Hardware Compatibility and Update Requirement Firmware updates are not optional — every new install must be updated, pre-configured, and tested on the bench before going onsite.* Update to the latest firmware (FW) first. —this is required ...

    • ICON-PRO Firmware Update Guide

      * Firmware updates are not optional — every new install must be updated, pre-configured, and tested on the bench before going onsite.* Option 1: USB Flash Tool (for firmware < 1.203) Link to the USB Flash Tool instructions. Only Firmware ≥ 2.203 is ...

    • How to Update Wireless Wiegand (WW) device (master or slave unit)

      Current Firmware versions for WW are starting from 3.XXX Connect the device to the internet using Wi-Fi connection. o Log in to the device through your local network: § Login: admin § Password: admin123 o Check the controller’s date and time ...