Current Firmware versions for WW are starting from 3.XXX
Connect the device to the internet using Wi-Fi
connection.
o Log in to the device through your local network:
§ Login: admin
§ Password: admin123
o Check the controller’s date and time settings. Ensure that the current date and time are correct, as this is critical for the update process.
o Go to the Maintenance section of the interface.
o Click the Check & Update button.
o Wait for the update process to complete.
After the update process is complete, verify its success by repeating the following steps:
o Return to the Maintenance section.
o Click the Check & Update button again.
o If the update was successful, you will see the message: "No Update Available."
o If the update not successful - Wait for the update process to complete.