How to Verify the Correct Network Configuration of Lumiring device (Icon-Pro, WW or Air-R/CR)

How to Verify the Correct Network Configuration of Lumiring device (Icon-Pro, WW or Air-R/CR)

o  Connect the device to the internet using either Ethernet (Icon-Pro, Air-CR) or Wi-Fi (WW or Air-R)

o  Log in to the device through your local network:

·         Login: admin

·         Password: admin123

o  Verify the date and time settings on the  device. The current date and time must be accurate, as this is critical for proper operation.

o  If the device has not received the correct time settings for an extended period:

·         Refresh the page by performing a page update.

·         Restart the device by performing a power cycle (turn off the power, wait a few moments, then turn it back on).

o   After refreshing or restarting, verify the date and time settings again.

o   If the date and time are still incorrect, we recommend checking:

·         Your network equipment (routers, switches, etc.).

·         The communication channel provided by your internet service provider.


    • Related Articles

    • How to use the AIR-Key

      Instructions on how to use the AIR-Key. 1. To use AIR-Key keys it is necessary to download the ViKey Wallet application. 2. It is necessary to have AIR-Key keys available to add to the applications installed in users' smartphones. After installing ...

    • How to Reset the device to the factory defaults

      Each LUMIRING device has hardware and software reset options. Furthermore there are partial reset options when all configuration can be reset except network settings that helps to speed up the process of further reconfiguration. Please consult with ...

    • Are LumiRing Devices Locked? Can They Be Connected to Third-Party Systems?

      Here's the improved Knowledge Base Article incorporating both the previous input and the introductory letter: Title: Are LumiRing Devices Locked? Can They Be Connected to Third-Party Systems? Introduction LumiRing devices are open for integration and ...

    • How to Update Wireless Wiegand (WW) device (master or slave unit)

      Connect the device to the internet using Wi-Fi connection. o Log in to the device through your local network: § Login: admin § Password: admin123 o Check the controller’s date and time settings. Ensure that the current date and time are correct, as ...

    • How to Update Air-R

      Connect the reader to the internet Wi-Fi connection. o Log in to the controller through your local network: § Login: admin § Password: admin123 o Check the reader’s date and time settings. Ensure that the current date and time are correct, as this is ...