How to Reset the device to the factory defaults
Each LUMIRING device has hardware and software reset options. Furthermore there are partial reset options when all configuration can be reset except network settings that helps to speed up the process of further reconfiguration.
Please consult with each device manual for the exact details of the reset procedure as they varies between devices.
Hardware Reset:
CAUTION: Hardware Reset.
- Applying a hardware reset will completely erase all data from the controller's memory, including access keys, rules, schedules, account data, and network settings.
- After this action, it will not be possible to undo changes or restore data.
- The controller will be returned to factory default settings.
ICON-PRO
ICON
AIR-CR
AIR-R
Wireless Wiegand
LRM-2CRS
Program Reset:
Reset via the Embedded Web Interface.
Applies to devices:
- ICON-Pro
- ICON
- AIR-CR
- AIR-R
- AIR-USB
- Wireless Wiegand
Full Reset, Partial Reset and Restart of the device can be performed in the Maintenance section of the devices embedded web interface.
CAUTION: Full Reset.
Applying a Full Reset will completely erase all data from the controller's memory, including access keys, rules, schedules, account data, and network settings.
After this action, it will not be possible to undo changes or restore data.
The controller will be returned to factory default settings.
CAUTION: Partial Reset.
Partial Reset will erase some data from the controller memory: access keys, rules, schedules, account data.
The device's network settings will not be reset.
It will then be impossible to undo changes or restore data.
Reset via the LEES app.
Applies to devices:
- ICON-Pro
- ICON
- AIR-CR
CAUTION: Full Reset.
Applying a Full Reset will completely erase all data from the controller's memory, including access keys, rules, schedules, account data, and network settings.
After this action, it will not be possible to undo changes or restore data.
The controller will be returned to factory default settings.
Related Articles
What is Wi-Fi password for the embedded controller Wi-Fi AP?
All controllers from the factory come with no default passwords for Wi-Fi AP, though there is a password for the web management interface. You can change password in the web interface of your controller and set up password for Wi-Fi AP. All ...Different FW revisions on Master and Slave, fix for "WW non-pairing issue"
If your devices don't pair with each other and you see different FW revision numbers on Master and Slave devices, you MUST upgrade to the latest and greatest FW from our Web Update Server. FW update procedure is identical to master or slave devices. ...How reliable are your devices?
Our devices are highly reliable, proven by many years of successful operation at various sites. Before shipment, each device undergoes hardware and software testing on specialized test benches with verification software. We constantly analyze after ...WW hardware (HW) interoperability,Firmware (FW) upgrade. How to bring WW to the latest FW release.
IMPORTANT: Hardware Compatibility and Update Requirement Update to the latest firmware (FW) first. —this is required before contacting support. Devices cannot be confirmed as compatible or able to pair if they have different or outdated firmware ...Do I need to make wired connections between the door controllers, or does each module function independently on the Internet?
Each access control unit is a network control device that can be connected to the Internet. Model variants allow you to control one, two or four doors without the need to install additional modules or expansion boards.