How do I ensure the correct date and time of events received from the controller?

How do I ensure the correct date and time of events received from the controller?

By default, the system automatically sets the controllers' clocks to GMT+00:00 by synchronizing with a time server when connected to the Internet. During the initial setup, it is essential to specify the local time zone of the controller and indicate whether daylight saving time applies in your region. Subsequently, all events logged by this controller will be displayed in the system according to the selected local time zone.

    • Related Articles

    • How to Verify the Correct Network Configuration of Lumiring device (Icon-Pro, WW or Air-R/CR)

      o Connect the device to the internet using either Ethernet (Icon-Pro, Air-CR) or Wi-Fi (WW or Air-R) o Log in to the device through your local network: · Login: admin · Password: admin123 o Verify the date and time settings on the device. The current ...

    • How to Update ICON-PRO with Firmware Version 1.195 and higher

      Connect the controller to the internet using either an Ethernet or Wi-Fi connection. o Log in to the controller through your local network: § Login: admin § Password: admin123 o Check the controller’s date and time settings. Ensure that the current ...

    • How to Update Air-R

      Connect the reader to the internet Wi-Fi connection. o Log in to the controller through your local network: § Login: admin § Password: admin123 o Check the reader’s date and time settings. Ensure that the current date and time are correct, as this is ...

    • How to Update Wireless Wiegand (WW) device (master or slave unit)

      Connect the device to the internet using Wi-Fi connection. o Log in to the device through your local network: § Login: admin § Password: admin123 o Check the controller’s date and time settings. Ensure that the current date and time are correct, as ...

    • What happens to the controller if the Internet is disconnected?

      If you disconnect the Internet, the controller will continue to operate offline, managing the access control system at the local network level without connecting to cloud services or remote servers. However, some features that require access to cloud ...