24V or 12V DC output on the controller or reader. If I connect 24V to the Icon-Pro will it output only 12Vto the reader?

• Related Articles

• How to Verify the Correct Network Configuration of Lumiring device (Icon-Pro, WW or Air-R/CR)

  o Connect the device to the internet using either Ethernet (Icon-Pro, Air-CR) or Wi-Fi (WW or Air-R) o Log in to the device through your local network: · Login: admin · Password: admin123 o Verify the date and time settings on the device. The current ...

• How to Update ICON-PRO with Firmware Version 1.195 and higher

  Connect the controller to the internet using either an Ethernet or Wi-Fi connection. o Log in to the controller through your local network: § Login: admin § Password: admin123 o Check the controller’s date and time settings. Ensure that the current ...

• PinPass or RFID combo reader support for ICON-Pro or AIR-CR

  List of Combo Readers Compatible with Lumiring Access Controllers Below are the combo readers that support RFID and/or PIN credentials for use with Lumiring Access Controllers: HID Signo 40K Series ? Important Note: ALLROORS currently does not ...

• Can I use your controller without Wi-Fi or 485 connection?

  Yes, our ICON, LRM or AIR can be set to work in a standalone mode (without WI-FI or 485 connection). Though while the device is in the standalone mode, and for configuration or any other needs such as changing controller settings, add/delete users, ...

• What happens to the controller if the Internet is disconnected?

  If you disconnect the Internet, the controller will continue to operate offline, managing the access control system at the local network level without connecting to cloud services or remote servers. However, some features that require access to cloud ...