How do I use Copy Protection?
Supported card formats: MIFARE Classic mini/1K/4K
Supported devices:
- AIR-USB Desktop Reader for RFID Card Encryption
- AIR-R Reader
- Reader-Controller AIR-CR
Application: Any access control systems using controllers with Wiegand or RS-485 interface support (via OSDP protocol)
Description: Copy protection secures private memory areas on RFID cards through encryption. Once encrypted, these areas can only be accessed with a specific password. Matching the encryption password on the ID and the reader allows access; if the passwords differ or are absent, the card is ignored. This ensures only authorized RFID cards are accessed.
Copying an encrypted card is limited; only open memory areas can be replicated, while protected areas remain secure.
Steps to Implement Copy Protection
Encryption Setup:
- Use the AIR-USB desktop reader to encrypt RFID cards.
- Activate encryption mode, set a six-character password, and confirm the settings.
- Place the ID on the desktop reader to complete encryption.
Enable Copy Protection Mode:
- Activate this mode on AIR-R readers.
- Enter the encryption password and apply the settings.
Activating the copy protection mode prevents the use of unencrypted RFID cards and reliably blocks unauthorized access.