Does your access control system have a built-in power supply, or do I need to purchase a separate one?
Our controllers support PoE or any regulated power supply between 12-24V, but power supplies and PoE switches are not included.
ATTENTION: The controller forwards the supplied voltage to connected devices.
For example, if powered by 24V (or any voltage within the 12-24V range), it supplies the same voltage to peripherals. Voltage below 12V is not recommended, especially if you are powering additional devices from the controller. Voltage above 24V may damage the controller. Ensure connected devices are compatible with the input voltage. If not, use an independent power source.
Related Articles
How should the Door Latch or Magnetic Lock be powered? Do I need an external power supply?
AIR and ICON-PRO devices use relays with a dry contact, which is galvanically unconnected to the power supply circuit of the device. You would need external Power Supply to power your lock. We highly recommend to use separate power supply for locks ...
Can I set up one master site for multiple buildings in your access control system and allow certain people to manage, add, and remove users in different locations?
The ability to manage facilities locally is under development and will include more flexibility to customize access rights for individual users based on their roles, responsibilities, and the context of the access control system. This feature has yet ...
Each access individual control module is one door by itself, and does it have to be wired daisy change from one module to another in a building, or is it just controlled Internet-based and is considered a separate module?
We have two "control modules" options: 2-door controller and One-door module (one door controller + reader all-in-one) and they are individually wired or alternatively wirelessly connected. No other devices or computers or servers needed on site. ...
How scalable is your cloud? What are you Access Control System limitations?
Overview The Alldoors.online cloud platform is designed for unlimited scalability, providing access control solutions for deployments of any size, from small offices to enterprise-level facilities. With its flexibility and reliability, LumiRing’s ...
Do I need to make wired connections between the door controllers, or does each module function independently on the Internet?
Each access control unit is a network control device that can be connected to the Internet. Model variants allow you to control one, two or four doors without the need to install additional modules or expansion boards.